Cảm biến lưu lượng SA5000
| Product characteristics | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 | ||||||||
| Process connection | threaded connection M18 x 1,5 internal thread | ||||||||
| Application | |||||||||
| Special feature | Gold-plated contacts | ||||||||
| Media | water; glycol solutions; air; oils | ||||||||
| Note on media |
|
||||||||
| Medium temperature [°C] | -20…90 | ||||||||
| Pressure rating [bar] | 100 | ||||||||
| Pressure rating [Mpa] | 10 | ||||||||
| MAWP (for applications according to CRN) [bar] | 100 | ||||||||
| Electrical data | |||||||||
| Operating voltage [V] | 18…30 DC | ||||||||
| Current consumption [mA] | < 100 | ||||||||
| Protection class | III | ||||||||
| Reverse polarity protection | yes | ||||||||
| Power-on delay time [s] | 10 | ||||||||
| Inputs / outputs | |||||||||
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 | ||||||||
| Outputs | |||||||||
| Total number of outputs | 2 | ||||||||
| Output signal | switching signal; analogue signal; frequency signal; IO-Link; (configurable) | ||||||||
| Electrical design | PNP/NPN | ||||||||
| Number of digital outputs | 2 | ||||||||
| Output function | normally open / normally closed; (parameterisable) | ||||||||
| Max. voltage drop switching output DC [V] | 2.5 | ||||||||
| Permanent current rating of switching output DC [mA] | 250 | ||||||||
| Number of analogue outputs | 1 | ||||||||
| Analogue current output [mA] | 4…20; (scalable) | ||||||||
| Max. load [Ω] | 350 | ||||||||
| Short-circuit protection | yes | ||||||||
| Type of short-circuit protection | pulsed | ||||||||
| Overload protection | yes | ||||||||
| Frequency of the output [Hz] | 0…1000 | ||||||||
| Measuring/setting range | |||||||||
| Probe length L [mm] | 45 | ||||||||
| Operating mode | relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended) | ||||||||
| Note on factory setting |
|
||||||||
| Temperature monitoring | |||||||||
| Measuring range [°C] | -20…90 | ||||||||
| Resolution [°C] | 0.2 | ||||||||
| Liquid media – absolute operating mode | |||||||||
| Setting range [m/s] | 0.04…3 | ||||||||
| Greatest sensitivity [m/s] | 0.04…3 | ||||||||
| Liquid media – relative operating mode | |||||||||
| Setting range [m/s] | 0.04…6 | ||||||||
| Greatest sensitivity [m/s] | 0.04…3 | ||||||||
| Gases – operating mode “absolute” | |||||||||
| Setting range [m/s] | 0…100 | ||||||||
| Greatest sensitivity [m/s] | 30…100 | ||||||||
| Gases – operating mode “relative” | |||||||||
| Setting range [m/s] | 0…200 | ||||||||
| Greatest sensitivity [m/s] | 30…100 | ||||||||
| Accuracy / deviations | |||||||||
| Temperature drift [cm/s x 1/K] | 0,003 m/s x 1/K (< 20 °C; > 70 °C) | ||||||||
| Temperature gradient [K/min] | 100 | ||||||||
| Absolute operating mode | |||||||||
| Repeatability | 0,05 m/s; (water; flow velocity: 0,05…3 m/s) | ||||||||
| Relative operating mode | |||||||||
| Accuracy | ± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions:; water: 20…70 °C; inlet length: 1.5 m; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.) | ||||||||
| Repeatability | 0,05 m/s; (water; flow velocity: 0,05…3 m/s) | ||||||||
| Temperature monitoring | |||||||||
| Temperature drift | ± 0,005 K/°C | ||||||||
| Accuracy [K] | ± 0,3 / ± 1; (water; flow velocity: 0,3…3 m/s / air; flow velocity: > 10 m/s) | ||||||||
| Response times | |||||||||
| Response time [s] | 0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09) | ||||||||
| Temperature monitoring | |||||||||
| Dynamic response T05 / T09 [s] | 1,5 (T09); (water; flow velocity: 0,3…3 m/s) | ||||||||
| Software / programming | |||||||||
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; current/frequency output; medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour | ||||||||
| Interfaces | |||||||||
| Communication interface | IO-Link | ||||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||||
| IO-Link revision | 1.1 | ||||||||
| SDCI standard | IEC 61131-9 | ||||||||
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis | ||||||||
| SIO mode | yes | ||||||||
| Required master port type | A | ||||||||
| Process data analogue | 2 | ||||||||
| Process data binary | 2 | ||||||||
| Min. process cycle time [ms] | 3 | ||||||||
| Supported DeviceIDs |
|
||||||||
| Operating conditions | |||||||||
| Ambient temperature [°C] | -40…80 | ||||||||
| Storage temperature [°C] | -40…100 | ||||||||
| Protection | IP 65; IP 67 | ||||||||
| Tests / approvals | |||||||||
| EMC |
|
||||||||
| Shock resistance |
|
||||||||
| Vibration resistance |
|
||||||||
| MTTF [years] | 132 | ||||||||
| UL approval |
|
||||||||
| Mechanical data | |||||||||
| Weight [g] | 314 | ||||||||
| Materials | stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PBT-GF20; PBT-GF30 | ||||||||
| Materials (wetted parts) | stainless steel (1.4404 / 316L); Gasket: FKM | ||||||||
| Process connection | threaded connection M18 x 1,5 internal thread | ||||||||
| Displays / operating elements | |||||||||
| Display |
|
||||||||
| Remarks | |||||||||
| Remarks |
|
||||||||
| Pack quantity | 1 pcs. | ||||||||
| Electrical connection | |||||||||
| Connection | Connector: 1 x M12; coding: A; Contacts: gold-plated | ||||||||
Đặt mua cảm biến lưu lượng SA5000 IFM
Chi tiết xin liên hệ: Công ty TNHH Đầu tư và Thương mại HACO – Địa chỉ: Số 02 ngõ 100 đường Phủ Liễn, phường Hoàng Văn Thụ, TP Thái Nguyên, tỉnh Thái Nguyên
– Email: info.haco.industry@gmail.com
– Mobile/zalo: 0966236281
Đánh giá
Chưa có đánh giá nào.